EQT  |  SKU: EQT-01A01A01H-AA

EQT Staged ECU Tune - Audi MQB S3 2.0T (8V)

$ 148.75

Shipping rates and applicable discounts are applied during checkout.


Select Stage
Select Fuel

Description

Refined Tuning Solutions For Audi 8v S3

The Audi S3 8v comes with incredibly sophisticated engine management systems from the factory. Working with these ECUs requires an intimate knowledge of engine dynamics and software engineering to properly understand and modify the functionality. Luckily, we have decades of experience in both fields.

Using Cobb's ProTuner software, we have spent the past few years developing and refining our own set of staged tunes or "OTS tunes" for your MQB vehicle to be used with the Cobb AccessPort. Countless hours of in-house dyno testing, drivability road testing, and track torture testing went into the development of our calibrations. So you can be sure your car will perform optimally while retaining excellent drivability characteristics and a healthy margin of safety built into every tune.

We go way beyond the standard fuel, boost, and ignition adjustments that are common in the tuning world. We spent the time to go through and map out the complete torque control system, the complex ignition control and knock detection systems, the sophisticated turbo and airflow modeling systems, the fuel management and injection timing systems, and countless other parameters. The result can be felt any time you drive the car on a track, a fun road, or even for your regular grocery run. We generally see gains of 50-90whp over the factory calibrations depending on model and modification level. But along with those power gains, you will notice greatly improved throttle response, reduced turbo lag, and very smooth power throughout the powerband.  We also offer all the custom features from Cobb. These include our own customized traction control system, flat foot shifting, and burbles/crackles.

Change Log - For the full tune changelog click HERE

Ordering Your Staged Tune

When ordering, please select from the options listed for fuel quality, modifications, and special features you would like to be included in your tune. Please note that these maps are meant for the more basic Stage 1 and Stage 2 cars. If your car is more heavily modified and does not fall into the options available, we also offer custom e-tuning for just about any modification and fuel type available. 

Audi 8v S3 Staged Tune Power Estimates

This is a question asked all too frequently, and while we’d love to give you a specific number, many variables can affect dyno results. Even taking the car’s modifications out of the equation, other variables such as weather, elevation, fuel quality, dyno type, dyno fan setup, etc. come into play. With that being said, these are ranges that most vehicles will see, given standard modifications and reasonable conditions:

  • Stage 1 Golf R/S3 - 300-360whp
  • Stage 2 Golf R/S3 - 330-390whp

These results were acquired on our Dynocom chassis dyno in 2WD mode and close to optimal conditions. Dyno numbers can vary greatly depending on dyno type and conditions.  Please continue further down the page to view our dyno charts.

Ethanol Tunes for Audi 8v S3

When selecting E85 or Ethanol Blended Fuels, an Ethanol Content Analyzer is required. For more information, see our FAQ here.

Additional Options

Do you have Questions about our Burble Options? Visit our FAQ here

Cobb Launch Control

For more information Click Here

Cobb Traction Control

For more information Click Here

Cobb Flat Foot Shift

For more information Click Here

Golf R/S3 Staged Tunes: up to 415hp/430tq

Staged Tune Requirements for Golf R and S3

Stock Turbo Requirements

Stage 1

Performance Parts

  • Stock / Upgraded Intake
  • Stock / Upgraded Intercooler
  • Stock Downpipe ONLY

Fueling Parts

  • Pump Gas - Stock
  • E30 -Stock
  • E85 - Upgraded High Pressure Fuel Pump

Stage 2

Performance Parts

  • Upgraded Intake
  • Upgraded Intercooler
  • Upgraded Downpipe

Fueling Parts

  • Pump Gas - Stock
  • E30 -Stock
  • E85 - Upgraded High Pressure Fuel Pump

Why Choose an EQT Staged Tune?

  • Easy-to-use, handheld device for monitoring, logging, and flashing.
  • Flash your vehicle at home using the Accessport (does not need to stay connected to OBDII once the vehicle is flashed).
  • Quick map switching in as little as 60 seconds via Accessport.
  • Custom calibrations tailored for all climate conditions and elevations.
  • Supports multiple fuel types: 91 through 94 octane, E30, and E85.
  • Increased rev limiter and speed limiter removed (dependent on TCU tuning).
  • Burbles (crackles, pops, and bangs) available below 4000 RPM and more aggressive above 4000 RPM.
  • Supported upgrade paths beyond Stage 1 and Stage 2 hardware utilizing custom tuning.
×

Terms and Conditions Acknowledgement

By continuing with your purchase, you agree to our Terms and Conditions, which include our Refund Policy, Privacy Policy, Shipping Policy, and Terms of Service.

By clicking "Agree," you acknowledge that you have read, understood, and agree to all the terms and conditions outlined in these policies.

EQT Staged ECU Tune - Audi MQB S3 2.0T (8V) - Equilibrium Tuning, Inc.
EQT

EQT Staged ECU Tune - Audi MQB S3 2.0T (8V)

From $ 148.75 $ 175.00

Refined Tuning Solutions For Audi 8v S3

The Audi S3 8v comes with incredibly sophisticated engine management systems from the factory. Working with these ECUs requires an intimate knowledge of engine dynamics and software engineering to properly understand and modify the functionality. Luckily, we have decades of experience in both fields.

Using Cobb's ProTuner software, we have spent the past few years developing and refining our own set of staged tunes or "OTS tunes" for your MQB vehicle to be used with the Cobb AccessPort. Countless hours of in-house dyno testing, drivability road testing, and track torture testing went into the development of our calibrations. So you can be sure your car will perform optimally while retaining excellent drivability characteristics and a healthy margin of safety built into every tune.

We go way beyond the standard fuel, boost, and ignition adjustments that are common in the tuning world. We spent the time to go through and map out the complete torque control system, the complex ignition control and knock detection systems, the sophisticated turbo and airflow modeling systems, the fuel management and injection timing systems, and countless other parameters. The result can be felt any time you drive the car on a track, a fun road, or even for your regular grocery run. We generally see gains of 50-90whp over the factory calibrations depending on model and modification level. But along with those power gains, you will notice greatly improved throttle response, reduced turbo lag, and very smooth power throughout the powerband.  We also offer all the custom features from Cobb. These include our own customized traction control system, flat foot shifting, and burbles/crackles.

Change Log - For the full tune changelog click HERE

Ordering Your Staged Tune

When ordering, please select from the options listed for fuel quality, modifications, and special features you would like to be included in your tune. Please note that these maps are meant for the more basic Stage 1 and Stage 2 cars. If your car is more heavily modified and does not fall into the options available, we also offer custom e-tuning for just about any modification and fuel type available. 

Audi 8v S3 Staged Tune Power Estimates

This is a question asked all too frequently, and while we’d love to give you a specific number, many variables can affect dyno results. Even taking the car’s modifications out of the equation, other variables such as weather, elevation, fuel quality, dyno type, dyno fan setup, etc. come into play. With that being said, these are ranges that most vehicles will see, given standard modifications and reasonable conditions:

These results were acquired on our Dynocom chassis dyno in 2WD mode and close to optimal conditions. Dyno numbers can vary greatly depending on dyno type and conditions.  Please continue further down the page to view our dyno charts.

Ethanol Tunes for Audi 8v S3

When selecting E85 or Ethanol Blended Fuels, an Ethanol Content Analyzer is required. For more information, see our FAQ here.

Additional Options

Do you have Questions about our Burble Options? Visit our FAQ here

Cobb Launch Control

For more information Click Here

Cobb Traction Control

For more information Click Here

Cobb Flat Foot Shift

For more information Click Here

Select Stage

  • Stage 1
  • Stage 2

Select Fuel

  • 91-92 oct
  • 93-94 oct
  • E30 - Ethanol
  • E85 - (HPFP Required)
View product