EQT Staged ECU Tune - VW MQBe GTI 2.0T (Mk8)
Shipping rates and applicable discounts are applied during checkout.
- Stage 1 / 91-92oct
Couldn't load pickup availability
Description
Description
Refined Tuning Solutions For Mk8 GTI
The Mk8 GTI come with incredibly sophisticated engine management systems from the factory. Working with these ECUs requires an intimate knowledge of engine dynamics and software engineering to properly understand and modify the functionality. Luckily, we have decades of experience in both.
Using Cobb's ProTuner software, we have spent the past few years developing and refining our own set of staged tunes or "OTS tunes" for your MQB vehicle to be used with the Cobb AccessPort. Countless hours of in-house dyno testing, drivability road testing, and track torture testing went into the development of our calibrations. So you can be sure your car will perform optimally while retaining excellent drivability characteristics and a healthy margin of safety built into every tune.
We go way beyond the standard fuel, boost, and ignition adjustments that are common in the tuning world. We spent the time to go through and map out the complete torque control system, the complex ignition control and knock detection systems, the sophisticated turbo and airflow modeling systems, the fuel management and injection timing systems, and countless other parameters. The result can be felt any time you drive the car on a track, a fun road, or even for your regular grocery run. We generally see gains of around 120hp over the factory calibrations depending on model and modification level. But along with those power gains, you will notice greatly improved throttle response, reduced turbo lag, and very smooth power throughout the powerband. We also offer all the custom features from Cobb. These include our own customized traction control system, flat foot shifting, and burbles/crackles.
Ordering Your Mk8 GTI Staged Tune
When ordering, please select from the options listed for fuel quality, modifications, and special features you would like to be included in your tune. Please note that these maps are meant for the more basic Stage 1 and Stage 2 cars. If your car is more heavily modified and does not fall into the options available, we also offer custom e-tuning for just about any modification and fuel type available.
EQT Mk8 GTI Power Estimates
This is a question asked all too frequently, and while we’d love to give you a specific number, many variables can affect dyno results. Even taking the car’s modifications out of the equation, other variables such as weather, elevation, fuel quality, dyno type, dyno fan setup, etc. come into play. With that being said, these are ranges that most vehicles will see, given standard modifications and reasonable conditions:
Stage 1 - GTI
- 91-92oct: 305-315whp / 370-380wtq
- 93-94oct: 315-325whp / 380-390wtq
- E85 Low Torque: 330-350whp / 370-380wtq
- E85 High Torque: 345-355whp / 400-410wtq
Stage 2 - GTI
- 91-92oct: 310-320whp / 350-360wtq
- 93-94oct: 325-335whp / 370-380wtq
- E85 Low Torque: 355-365whp / 375-385wtq
- E85 High Torque: 355-365whp / 405-415wtq
For Dyno Charts, select the desired configuration via the dropdowns below the description. Please note that these results were acquired on our Dynocom chassis dyno in 2WD mode and close to optimal conditions. Dyno numbers can vary greatly depending on dyno type and conditions.
Additional Options
Do you have Questions about our Burble Options? Visit our FAQ here
Ethanol Tunes for Mk8 GTI
When selecting E85 or Ethanol Blended Fuels, an Ethanol Content Analyzer is required. For more information, see our FAQ here.
Box Codes
USDM Volkswagen Mk8 GTI (8Y0906264A_0001)
USDM Volkswagen Mk8 GTI (8Y0906264A_0003)
USDM Volkswagen Mk8 GTI (8Y0906264D_0001)
USDM Volkswagen Mk8 GTI (8Y0906264D_0002)
USDM Volkswagen Mk8 GTI (8Y0906264E_0001)
Mk8 GTI Staged Tune Power Output
Here are just a couple of examples of our tunes. Please note that these results were acquired on our Mustang chassis dyno with SAE correction.
Mk8 GTI Staged Tune Requirements
Stage 1
Modifications
Modifications
Performance Parts
- Stock / Upgraded Intake
- Stock / Upgraded Intercooler
- Stock Downpipe ONLY
Fueling Parts
- Pump Gas - Stock
- E85 - Stock
Stage 2
Modifications
Modifications
Performance Parts
- Upgraded Intake
- Upgraded Intercooler
- Stock/Upgraded Downpipe
Fueling Parts
- Pump Gas - Stock
- E85 - Stock
Why Tune With EQT?
- Easy-to-use, handheld device for monitoring, logging, and flashing.
- Flash your vehicle at home using the Accessport (does not need to stay connected to OBDII once the vehicle is flashed).
- Quick map switching in as little as 60 seconds via Accessport.
- Custom calibrations tailored for all climate conditions and elevations.
- Supports multiple fuel types: 91 through 94 octane, E30, and E85.
- Increased rev limiter and speed limiter removed (dependent on TCU tuning).
- Burbles (crackles, pops, and bangs) available below 4000 RPM and more aggressive above 4000 RPM.
- Supported upgrade paths beyond Stage 1 and Stage 2 hardware utilizing custom tuning.
Don't have an accessport? Take advantage of our staged tune bundles! Click the link below to tune with the best!