EQT  |  SKU: EQT-02A01X01A

EQT IS38+ Turbocharger - VW/Audi MQB 1.8T/2.0T

Don't Forget to bundle your FREE MQB 2.0T EQT Staged Tune when you purchase our IS38 Turbo

$ 832.50

Shipping rates and applicable discounts are applied during checkout.



EQT IS38 Turbo Upgrade

Whether you're looking for an Upgrade for your GTI, GLI, A3, or 1.8T Powered MQB Car, or have experienced a turbocharger failure on your Golf R or S3, the EQT IS38+ Turbocharger is a great option for you!

The EQT IS38+ features original size compressor wheel and turbine wheels as found in the factory IHI IS38 turbocharger which makes it an ideal replacement for your Golf R and S3 without any tuning changes required while gaining a reliability upgrade.

To add increased reliability over the original VW/Audi units we've upgraded the bearing system to include a 360° thrust bearing system for optimal longevity and support while under heavy loads.

EQT IS38+ Turbocharger - Equilibrium Tuning, Inc.

What's Included With Our IS38 Turbo Kit?

The EQT IS38 turbo is a pre-assembled direct replacement for your factory IHI IS20 or IS38 turbocharger. Included is all the turbocharger and all hardware you need to get up and running.

When ordering, the turbo can be optioned to have a pre-calibrated waste gate installed to save you the hassle of swapping and recalibrating your existing wastegate.

At this time we do not offer a pre-installed diverter valve. You will need to reuse your current factory or aftermarket diverter valve from your IS20 or IS38 turbo.

IS38 Staged Tune Power Figures

Please note that these are estimates and actual power figures depend on your specific climate, vehicle modifications, and dyno used.

FREE Staged Tune

When purchasing the EQT IS38 you can bundle a free EQT staged tune to squeeze the most power out of your new turbocharger!

For any MQB GLI/GTI/A3 tuning is required to utilize our IS38 turbocharger since you would be upgrading from the factory IHI IS20 turbocharger.

For MQB Golf R and Audi S3, tuning is not required, however, we highly encourage it for those looking to get the most out of their new IS38 turbo. Alternatively, if you are looking to keep your factory IS38 turbocharger, our tunes are also compatible.

Modifications and Tuning

Tuning Your Factory IS20 Car (Golf GTI,GLI, A3)

Stage 1+ IS38 Tune (GTI/GLI/A3)

Fueling Requirements

  • Pump Gas Tunes(91-93 octane) - Stock.
  • E30 & E85 Tunes - Upgraded HPHP (Required)
  • Flex-Fuel - Upgraded HPHP & Flex-Fuel Harness (Required)

Hardware Requirements

  • Upgraded Intake
  • Upgraded Intercooler
  • IS38 Turbocharger
  • DSG Tune / Upgraded Clutch
  • Stock Downpipe

Stage 2+ IS38 Tune (GTI/GLI/A3)

Fueling Requirements

  • Pump Gas Tunes(91-93 octane) - Stock.
  • E30 Tunes - Upgraded HPHP (Required)
  • E85 - Upgraded HPFP and LPFP (Required)
  • Flex-Fuel - Flex-Fuel Harness, Upgraded HPHP and LPFP (Required)

Hardware Requirements

  • Upgraded Intake
  • Upgraded Intercooler
  • Upgraded Downpipe
  • IS38 Turbocharger
  • DSG Tune / Upgraded Clutch

Tuning Your Factory IS38 (Golf R and Audi S3)

Stage 1 Tune (R/S3)

Fueling Requirements

  • Pump Gas Tunes(91-93 octane) - Stock.
  • E30 Tunes - Stock
  • E85 Tunes - Upgraded HPHP (Required)
  • Flex-Fuel - Upgraded HPHP & Flex-Fuel Harness (Required)

Hardware Requirements

  • Upgraded Intake
  • Upgraded Intercooler
  • Stock Downpipe
  • DSG Tune / Upgraded Clutch

Stage 2 Tune (R/S3)

Fueling Requirements

  • Pump Gas Tunes(91-93 octane) - Stock.
  • E30 Tunes - Stock
  • E85 Tunes - Upgraded HPHP (Required)
  • Flex-Fuel - Upgraded HPHP & Flex-Fuel Harness (Required)

Hardware Requirements

  • Upgraded Intake
  • Upgraded Intercooler
  • Upgraded Downpipe
  • DSG Tune / Upgraded Clutch

Interested In Tuning?

Get Started With Our Staged Tunes

×

Terms and Conditions Acknowledgement

By continuing with your purchase, you agree to our Terms and Conditions, which include our Refund Policy, Privacy Policy, Shipping Policy, and Terms of Service.

By clicking "Agree," you acknowledge that you have read, understood, and agree to all the terms and conditions outlined in these policies.

EQT IS38+ Turbocharger - Equilibrium Tuning, Inc.
EQT

EQT IS38+ Turbocharger - VW/Audi MQB 1.8T/2.0T

$ 832.50 $ 925.00

Status: (In Stock)

Whether you're looking for an Upgrade for your GTI, GLI, A3, or 1.8T Powered MQB Car, or have experienced a turbocharger failure on your Golf R or S3, the EQT IS38+ Turbocharger is a great option for you!

Save when you bundle an EQT Staged tune with your IS38+ Turbocharger!

Fairly priced and with multiple configurations to ensure you get the best value including;

All EQT IS38+ Turbochargers include installation hardware.

The OEM IS20 and IS38 are not exactly known for their reliability. EQT has taken similar technology as found in our Vortex Turbochargers and shared it with an OEM Sized IS38 turbocharger.



This EQT IS38+ features original size compressor and turbine wheels as found in the factory IS38 turbocharger which makes it an ideal replacement for your Golf R and S3 without any tuning changes required while gaining a reliability upgrade.

To add increased reliability over the original VW/Audi units we've upgraded the bearing system to include a 360° thrust bearing for optimal longevity and support while under heavy loads.


Thrust Bearing

Fitting a 360° Thrust Bearing increases the reliability of your turbocharger and allows a safer way of running high boost pressures. The thrust bearing is under heavy pressure when the turbocharger is operating, the larger surface area of a 360 thrust bearing (as opposed to a traditional 270°unit) is better equipped to cope with these axial loads

Thrust Bearing

Wheel Sizes

Compressor Wheel: 45.2mm / 58.0mm 

Turbine Wheel: 47.4mm / 54.7mm


Tuning

 

Fueling Requirements

GTI/GLI/A3

Golf R / Audi S3

Fitment

All EA888.3 Powered MQB Vehicles

Installation Hardware

All of the necessary Gaskets, O rings, and hardware are included with every EQT IS38+.

Wastegate

If selected a brand new wastegate will be included with the turbocharger. Calibration will be required. Typically you'll want to set your voltage to 3.85-3.9v

View product